Job Search Results for aerospace engineer

Insight Global is seeking an Embedded Test Engineer to to improve reliability across our IoT-enabled cold chain logistics platform serving healthcare and pharmaceutical customers. This role is... More firmware-focused and hands-on. You will spend significant time running manual tests on real hardware, reproducing issues, collecting logs, and performing ship testing (pre-deployment verification) to ensure devices behave correctly before they go out to customers.You will work closely with firmware and hardware engineering, and coordinate with backend and operations as needed to validate end-to-end behavior.Responsibilities?Validate firmware releases on hardware against defined scope and acceptance criteria?Execute manual regression testing across core device behaviors (power, sensors, charging, connectivity, fault recovery)?Perform ship testing and pre-deployment verification, including device setup, configuration checks, and release readiness validation for outgoing units?Run dedicated firmware test passes for each release (smoke, regression, and targeted suites) and report clear pass/fail results?Validate GPS functionality and firmware behavior, including time to first fix, accuracy checks, signal loss and recovery, and low-signal edge cases?Reproduce and triage device issues using logs and lab tools (serial logs, in-house tools)?Partner with firmware and hardware engineers early to clarify expected behavior, edge cases, and testability needs?Validate connectivity behavior relevant to firmware, including pairing and stability?Support investigation and reproduction of customer-impacting issues by capturing device evidence and helping isolate root cause boundaries?Contribute light scripting and tooling to speed up repetitive checks (Python, shell), but automation is not the core requirement?Communicate quality status, risks, and tradeoffs clearly to cross-functional stakeholdersCompensation: up to $110k (possible flex., based on experience) + Health/Dental/Vision/401k BenefitsWe are a company committed to creating diverse and inclusive environments where people can bring their full, authentic selves to work every day. We are an equal opportunity/affirmative action employer that believes everyone matters. Qualified candidates will receive consideration for employment regardless of their race, color, ethnicity, religion, sex (including pregnancy), sexual orientation, gender identity and expression, marital status, national origin, ancestry, genetic factors, age, disability, protected veteran status, military or uniformed service member status, or any other status or characteristic protected by applicable laws, regulations, and ordinances. If you need assistance and/or a reasonable accommodation due to a disability during the application or recruiting process, please send a request to HR@insightglobal.com.To learn more about how we collect, keep, and process your private information, please review Insight Global's Workforce Privacy Policy: https://insightglobal.com/workforce-privacy-policy/.Less

This position performs design coordination of seats and seat components. Coordinates between various customers and vendors. Interfaces with Program Manager on project development and design progress.... More Reviews customer requirements and specification and relates them to product design. Monitors day-to-day design progress as required. Assures conformity of product and that engineering deadlines are met. Works and makes decisions independently with little supervision.2. Essential Functions (Duties and Responsibilities)Main Function Responsibilities:A) Confers with customers and vendors on conceptual configuration and initial design requirements for various new and on-going seat programs.B) Reviews design specifications and incorporates into assigned product.C) Prepares lay-outs of overall design task including structural and articulation systems.D) Defines design standards to maintain commonality with existing product line.E) Defines and sets goals as to complete tasks as expeditiously as possible.F) Prepares advanced bill of materials and long-lead item list.G) Review design package to assure conformance to latest specifications and regulations.H) Prepares drawings for release.I) Assumes liaison duties when product reaches the various manufacturing stages.J) Performs other duties as assigned.We are a company committed to creating diverse and inclusive environments where people can bring their full, authentic selves to work every day. We are an equal opportunity/affirmative action employer that believes everyone matters. Qualified candidates will receive consideration for employment regardless of their race, color, ethnicity, religion, sex (including pregnancy), sexual orientation, gender identity and expression, marital status, national origin, ancestry, genetic factors, age, disability, protected veteran status, military or uniformed service member status, or any other status or characteristic protected by applicable laws, regulations, and ordinances. If you need assistance and/or a reasonable accommodation due to a disability during the application or recruiting process, please send a request to HR@insightglobal.com.To learn more about how we collect, keep, and process your private information, please review Insight Global's Workforce Privacy Policy: https://insightglobal.com/workforce-privacy-policy/.Less

Analyzes, conducts root cause analysis and develops dispositions for design non-conformances.Applies engineering principles to research technical, operational and quality issues that cannot be... More resolved by customer and designs interim and final engineering solutions.Identifies documents, analyzes reported problems and communicates deviations that could impact design intent and safety; recommends and manages resolution.Develops and implements product/process improvements.Supports Integrated Product Teams (IPT) and participates in design reviews.Represents the engineering community in the build through post production environment.Ensures supplier and build partner compliance with Boeing standards.Develops customer correspondence for continued safe operation and maintenance of equipment.Participates in on-site disabled product repair teams and accident investigation or support team.Analyzes damage repair or structural modification to determine appropriate jacking and shoring, prevent collateral damage and assure a safe work environment.Designs interim structural repairs and conducts static strength analysis.Develops non-destructive test procedures, tools and standards. Conducts simple static strength analysis.We are a company committed to creating diverse and inclusive environments where people can bring their full, authentic selves to work every day. We are an equal opportunity/affirmative action employer that believes everyone matters. Qualified candidates will receive consideration for employment regardless of their race, color, ethnicity, religion, sex (including pregnancy), sexual orientation, gender identity and expression, marital status, national origin, ancestry, genetic factors, age, disability, protected veteran status, military or uniformed service member status, or any other status or characteristic protected by applicable laws, regulations, and ordinances. If you need assistance and/or a reasonable accommodation due to a disability during the application or recruiting process, please send a request to HR@insightglobal.com.To learn more about how we collect, keep, and process your private information, please review Insight Global's Workforce Privacy Policy: https://insightglobal.com/workforce-privacy-policy/.Less

Role PurposeSupport the development of an automated fabrication factory by designing and integrating controls for welding and automation systems, with emphasis on precision, repeatability, and... More distortion control.Key Responsibilities?Design and support controls systems for automated welding and fabrication ?Develop strategies for controlling distortion, tolerances, and fixturing ?Collaborate with CAD and factory design teams to ensure automation feasibility ?Support integration of vendor automation equipment into the factory environmentWe are a company committed to creating diverse and inclusive environments where people can bring their full, authentic selves to work every day. We are an equal opportunity/affirmative action employer that believes everyone matters. Qualified candidates will receive consideration for employment regardless of their race, color, ethnicity, religion, sex (including pregnancy), sexual orientation, gender identity and expression, marital status, national origin, ancestry, genetic factors, age, disability, protected veteran status, military or uniformed service member status, or any other status or characteristic protected by applicable laws, regulations, and ordinances. If you need assistance and/or a reasonable accommodation due to a disability during the application or recruiting process, please send a request to HR@insightglobal.com.To learn more about how we collect, keep, and process your private information, please review Insight Global's Workforce Privacy Policy: https://insightglobal.com/workforce-privacy-policy/.Less

Design and support electrical systems ranging from substation secondary 4160V down to 120V distributionWork on facility power distribution and power management systemsDevelop one-line schematics,... More electrical system drawings, and technical studiesApply NFPA and IEEE standards to electrical systemsSupport refurbishment and reactivation of large aerospace test facilities (NASA)We are a company committed to creating diverse and inclusive environments where people can bring their full, authentic selves to work every day. We are an equal opportunity/affirmative action employer that believes everyone matters. Qualified candidates will receive consideration for employment regardless of their race, color, ethnicity, religion, sex (including pregnancy), sexual orientation, gender identity and expression, marital status, national origin, ancestry, genetic factors, age, disability, protected veteran status, military or uniformed service member status, or any other status or characteristic protected by applicable laws, regulations, and ordinances. If you need assistance and/or a reasonable accommodation due to a disability during the application or recruiting process, please send a request to HR@insightglobal.com.To learn more about how we collect, keep, and process your private information, please review Insight Global's Workforce Privacy Policy: https://insightglobal.com/workforce-privacy-policy/.Less

Role PurposeSupport the development of an automated steel fabrication factory by converting an existing reactor building design into modular, manufacturable components and defining the factory... More processes required to fabricate and assemble them. The focus is manufacturability, modularization, and factory process design.Key Responsibilities?Break down a large, monolithic CAD model into modular components suitable for factory fabrication ?Translate designs between AutoCAD (civil/architectural) and SolidWorks (manufacturing/engineering) ?Define fabrication and assembly processes for large steel structures ?Support factory layout decisions, including material flow, module handling and flipping, fixturing strategies, and tolerance/distortion management ?Collaborate with controls, automation, and manufacturing teams to ensure designs are executable in a factory environmentWe are a company committed to creating diverse and inclusive environments where people can bring their full, authentic selves to work every day. We are an equal opportunity/affirmative action employer that believes everyone matters. Qualified candidates will receive consideration for employment regardless of their race, color, ethnicity, religion, sex (including pregnancy), sexual orientation, gender identity and expression, marital status, national origin, ancestry, genetic factors, age, disability, protected veteran status, military or uniformed service member status, or any other status or characteristic protected by applicable laws, regulations, and ordinances. If you need assistance and/or a reasonable accommodation due to a disability during the application or recruiting process, please send a request to HR@insightglobal.com.To learn more about how we collect, keep, and process your private information, please review Insight Global's Workforce Privacy Policy: https://insightglobal.com/workforce-privacy-policy/.Less

We are seeking a highly skilled?Hardware/Software Engineer to support?Depots CMXG and AMXG, providing critical engineering expertise to both the?Commodity Maintenance Group and the?Aircraft... More Maintenance Group. This role focuses on ensuring the reliability, accuracy, and performance of?aircraft component test stands, including those used for?landing gear, aircraft starters, and other flight-critical systems.You will serve as a systems-level engineer responsible for diagnosing, validating, and improving both hardware and software elements of automated test equipment (ATE). This position requires hands-on troubleshooting, coordination with test stand manufacturers, and deep technical understanding of how aircraft components should behave under test.Duties Include but are not limited to: Validate that aircraft components (e.g., landing gear assemblies, aircraft starters, hydraulic components) are being tested correctly on depot-level test stands.Determine whether anomalies originate from?test stand hardware,?test stand software, or the?unit under test (UUT).Perform root-cause analysis on test failures, inconsistent readings, or unexpected system behavior.Ensure test stands meet engineering, safety, and Air Force depot requirements.Serve as the primary?hardware/software liaison with test stand OEMs and third-party test equipment manufacturers.Debug, modify, and optimize test stand software, including data acquisition, control logic, and instrumentation interfaces.Support hardware integration, including sensors, actuators, signal conditioning, and embedded control systems.Review and update test procedures, wiring diagrams, interface control documents, and system-level schematics.Act as a?systems engineer overseeing the full lifecycle of test stand capability?from requirements and design through deployment and sustainment.Translate depot maintenance needs into technical requirements for test stand upgrades or new test capabilities.Support configuration management, documentation updates, and engineering change proposals.Collaborate with cross-functional teams including depot technicians, maintainers, program managers, and Air Force engineering authorities.Develop, troubleshoot, and maintain test applications using?LabVIEW and?LabWindows/CVI (preferred).Work with data acquisition hardware, PXI systems, instrumentation buses, and real-time control systems.Utilize engineering tools for signal analysis, instrumentation calibration, and automated test sequencing.We are a company committed to creating diverse and inclusive environments where people can bring their full, authentic selves to work every day. We are an equal opportunity/affirmative action employer that believes everyone matters. Qualified candidates will receive consideration for employment regardless of their race, color, ethnicity, religion, sex (including pregnancy), sexual orientation, gender identity and expression, marital status, national origin, ancestry, genetic factors, age, disability, protected veteran status, military or uniformed service member status, or any other status or characteristic protected by applicable laws, regulations, and ordinances. If you need assistance and/or a reasonable accommodation due to a disability during the application or recruiting process, please send a request to HR@insightglobal.com.To learn more about how we collect, keep, and process your private information, please review Insight Global's Workforce Privacy Policy: https://insightglobal.com/workforce-privacy-policy/.Less

Develops program and project requirements, develops highly complex equipment and tooling concepts and designs solutions, including alternatives for the Production System.Validates analysis of... More technical data, influences product engineering design and makes robotics, automation or technical recommendations to support production system integration.Leads the creation and modification of equipment and tooling definition at the program level.Executes project plans, provides input to Make/Buy decisions and partners with Procurement to meet program schedule, cost and quality targets.Ensures compliance with safety, producibility, maintainability, reliability, ergonomic factors and regulatory requirements. Leads gated reviews and develops plans for production readiness, preventative maintenance and spares.Validates contractual performance milestones.Develops and implements work-arounds and maintains configuration of hardware, software, and documentation.Conducts studies and make recommendation for disposition of assets.Validates contractual performance milestones, maintains configuration control, conducts technical reviews, and prepares plans for productions readiness, preventative maintenance, and spares.Evaluate customer and/or operational needs to define and coordinate mechanical support equipment performance requirements, integrate technical parameters and assure compatibility of all physical, functional and program interfacesProvide engineering expertise during production development activities; developing program and project requirements of highly complex equipment and tooling solutions, including alternatives for the Production System, in the areas of mechanical design, assembly, integration, & test.Participate in equipment and tool inspections/demonstrations to ensure requirements are metLead Root Cause/Corrective Action (RCCA) efforts and drive results of the RCCA to productionAid engineers or technicians with returning equipment to productionConducts training for Production and Maintenance personnel.Provides technical management of suppliers and leads process improvementsCreates and implements maintenance workshops with production and maintenance personnelIdeal candidate will be a mechanical engineer who has done design workWe are a company committed to creating inclusive environments where people can bring their full, authentic selves to work every day. We are an equal opportunity employer that believes everyone matters. Qualified candidates will receive consideration for employment opportunities without regard to race, religion, sex, age, marital status, national origin, sexual orientation, citizenship status, disability, or any other status or characteristic protected by applicable laws, regulations, and ordinances. If you need assistance and/or a reasonable accommodation due to a disability during the application or recruiting process, please send a request to Human Resources Request Form. The EEOC "Know Your Rights" Poster is available here. To learn more about how we collect, keep, and process your private information, please review Insight Global's Workforce Privacy Policy: https://insightglobal.com/workforce-privacy-policy/ .Less

Insight Global is looking for Embedded Software Engineers in the greater Tampa Bay area or Grand Rapids, MI. This person will be responsible for development, analysis, integration, and testing of... More complex hardware for an aviation system. This project will require coding in C language for a operating system that is similar to a Linux environment. Experience with aviation protocols is highly preferred. Other responsibilities include validation of high and low-level requirements, decomposition of requirements, and the digitization of analogs.We are a company committed to creating diverse and inclusive environments where people can bring their full, authentic selves to work every day. We are an equal opportunity/affirmative action employer that believes everyone matters. Qualified candidates will receive consideration for employment regardless of their race, color, ethnicity, religion, sex (including pregnancy), sexual orientation, gender identity and expression, marital status, national origin, ancestry, genetic factors, age, disability, protected veteran status, military or uniformed service member status, or any other status or characteristic protected by applicable laws, regulations, and ordinances. If you need assistance and/or a reasonable accommodation due to a disability during the application or recruiting process, please send a request to HR@insightglobal.com.To learn more about how we collect, keep, and process your private information, please review Insight Global's Workforce Privacy Policy: https://insightglobal.com/workforce-privacy-policy/.Less

Insight Global is seeking an MS&A Aerospace Engineer to join one of their top defense clients at Hill Air Force Base supporting a large defensive weaponry program. This individual will be responsible... More for acting as the technical liaison and action officer to support collaboration between the Aerospace Vehicle Equipment Division, the prime contractor, and external stakeholders. These individuals will be reviewing requirements, specification documents, designs, architectures, and products, as well as coordinate with other teams and stakeholders in the development and evaluation of MS&A requirements related to the overall large program. Currently, this individual will be a part of a highly technical team to create and review code for the 6 DOF simulation in C++ and Python to verify results from stakeholders on the program to make informed decisions for next steps of the program.We are a company committed to creating diverse and inclusive environments where people can bring their full, authentic selves to work every day. We are an equal opportunity/affirmative action employer that believes everyone matters. Qualified candidates will receive consideration for employment regardless of their race, color, ethnicity, religion, sex (including pregnancy), sexual orientation, gender identity and expression, marital status, national origin, ancestry, genetic factors, age, disability, protected veteran status, military or uniformed service member status, or any other status or characteristic protected by applicable laws, regulations, and ordinances. If you need assistance and/or a reasonable accommodation due to a disability during the application or recruiting process, please send a request to HR@insightglobal.com.To learn more about how we collect, keep, and process your private information, please review Insight Global's Workforce Privacy Policy: https://insightglobal.com/workforce-privacy-policy/.Less